The TC-3 bioreactor allows running up to three culture chambers in parallel with under the same deformation conditions. However, since the scaffolds used for the culture have usually different dimensions, which can result in different deformation conditions as a function of the particular size of each scaffold.
The adjustable anchoring system allows to modify the length of the shaft of each chamber in order to adapt it the the size of the scaffold in each chamber. By means of a simple mechanism, this system can also be used to adjust the hydrostatic pressure chambers to provide the same pressure conditions or to adapt length of the shaft to run a experiment with "long" and "short" scaffolds simultaneously.
It is compatible with all the available TC-3 chambers and grips.
Adjustable anchoring system | |
---|---|
Anchoring system adjustable in length to be used with the TC-3 system | |
Material | Stainless steel |
Adjustment range | +/- 3 [mm] |
All the disposable materials necessary to build a flow circuit.
All the disposable materials necessary to build a flow circuit.
All the disposable materials necessary to build a flow circuit.
These are the accessories available for the TEB1000 bioreactor series.
This is the consumables list which can be used with the P3D chambers.
If you have question or would like to receive additional information about the P3D accessories and consumables, do not hesitate to contact us!