TEB1000 Accessories & Consumables list


These are the accessories available for the TEB1000 bioreactor series.




This is the consumables list which can be used with the P3D chambers.


If you have question or would like to receive additional information about the P3D accessories and consumables, do not hesitate to contact us!

TEB1000 images and videos




This video shows the main steps required to develop an alternating dynamic seeding experiment on porous scaffolds. The experimental set up is built using the the EBERS P3D chambers together with a seeding rack and the TEB1000 flow bioreactor.


TEB1000 accessories



Monitoring Software

Register to your computer the temperature and gas concentrations.

cooling system

Medium refrigerator

Maintain up to three 250 ml culture medium reservoirs in optimal temperature conditions.


Low flow pumphead

Five channel pumphead for flow rates between 0.0033 and 33 ml/min.


High flow pumphead

Single channel four roller pumphead for flow rates between 0.1 and 400 ml/min.




Tubing and connectors

All the disposable materials necessary to build a flow circuit.


TEB1000 specifications


The table below shows the main technical specifications of the EBERS TEB1000 bioreactor.


TEB1000 flow bioreactor
Temperature control
Temperature range Room temperature +4 to +50 ºC
Control ± 0.1 ºC
Stability ± 0.1 ºC
Uniformity ≤±0.3 ºC
CO2 control
Range 0.2-20%
Stability ± 0.1 ºC
Service pressure 0.35 bar
Recuperation (up to 90% of preset value) 0.7 %/min
O2 control (Optional)
Range 1-19%
Service pressure 1 bar
Pumping system
Number of pumps Two independent subsystems with electric engines and electronics located outside the internal chamber of the Master Unit, to avoid overheating, reduce the risk of contamination and increase useful volume
Number of pumpheads Up to 2 pumpheads can be used with each subsystem (4 pumpheads in total)
Compatibility High flow (HF) and Low flow (LF) pumpheads
HF Pumphead
  • 1 channel pumphead
  • Flow rate: 0.1 to 400 ml/min
LF Pumphead
  • 5 channel pumphead
  • Flow rate: 0.003 to 33 ml/min
Number of channels per pumphead
  • HF pumphead: 1 channel/pumphead
  • LF pumphead: 5 channel/pumphead
Digital control of flow conditions by means of touchscreen
  • Real time electronic flow rate control
  • Automatic graph of pump rotation speed
  • Independent control of each subsystem
  • Pre-configured flow profiles
  • Possibility of introducing user-defined complex flow protocols
  • Flow direction can be alternated
  • Pulsatile flow (regulation of frequency and amplitude)
  • Easy-to-use intuitive interface
  • Special flow control module for alternative dynamic perfusion
Power supply and consumption
Power supply 110-220 V, 50-60 Hz, IEC 14 power cord
Nominal power 1800 W
External dimensions [W x D x H] 686 x 803 x 848 mm
Internal dimensions [W x D x H] 540 x 451 x 693 mm
Weight 120 kg

Please contact us for further information if you want to know more about the TEB1000.