This anchroing system allows to customize the length of the chamber shaft in order to adapt it to the length of the scaffold. Thereby, the deformation conditions can be adjusted when working with different length scaffolds or to obtain homogenous conditions when working with the hydrostatic pressure chambers. It is comaptible with all the chambers and grips available.
Culture chambers are designed to be compatible with all the available deformation grips.
Apply tension loads on cylindrical or sheet-like scaffolds.
Apply compression loads on your scaffolds.
Apply tension loads to membranes or sheet-like substrates.
This chambers allows applying flow through the pores of your scaffold while subjected to compressive loads and flow thorugh the lumen of your tubular scaffold when subjected to tension loads.
Apply perfusion through the pores of your scaffold while subjecting it to compressive loads.
Use this set of grips to create tension conditions on your sample while subjected to luminal flow.
Apply up to 4 bar of hydrostatic pressure to your samples using the TC-3 system.
The table below shows the main technical specifications of the EBERS TC-3 Mechanical Stimulation Bioreactor.
|Electrical Stimulation Module|
|Voltage digital adjustment||Up to 30 [V]|
|Maximal current value||1 [A]|
|Pulse duration||3-1000 [ms]|
|Short circuit and open circuit electronic protection||Yes|
|Pulse synchronization with mechanical stimulation||Yes|
|Electrodes||Platinum/Iridium autoclavable electrodes|
Please contact us for further information if you want to know more about the Electrical Stimulation Module.