Home Enterprise Products O2 sensors BlueBlink specifications

BlueBlink specifications

Specifications

The table below shows the main technical specifications of the EBERS BlueBlink oxygen sensors.

 

BlueBlink oxygen sensors
Optical reader
Sampling time 1 – 10min (in 1 min. increments).
Wavelength ilumination LEDs 450nm
Sensing spots
Analyte Gaseous & disolved oxygen
Sterility Pre-sterilized
Measurement range 0-21% O2
0-230 hPa
16 mg/L

Resolution at:

  • 1 % O2
  • 10 hPa

 

  • 0.01 %
  • 0.1 hPa
 Resolution at:
  • 20.9 % O2
  • 210 hPa
  
  • 0.03 %
  • 0.3 hPa
Accuracy 2.5 %
Measurement T range 0 – 50 ºC
Calibration Two-point calibration in oxygen-free  environment (nitrogen, sodium sulfite) and air-saturated environment
Number of measurements ~10.000
Attachment

Self-adhesive, spots attach well to most cell culture surfaces.
Non self-adhesive spots & sterile glue are also available.
Disposable spots.
Incompatibilities Organic solvents, chlorine gas
No cross-sensitivity with: pH, CO2, H2S, SO2, ionic species
Operation conditions
Temperature range 0 – 50ºC
Humidity range 0 – 100%
Pressure range 0 – 2000hPa
Storage condiotions
Temperature Room temperature
Software requirements
Windows 7 or higher
Dimensions
Optical reader 24 x 24 x 36 mm
Sensing spot 15 mm in diameter

Please contact us for further information if you want to know more about the BlueBlink sensors.