Home 
Tissue Engineering Bioreactors Load culture TC-3 Accessories Deformation and flow Flow-tension grips
Tissue Engineering Bioreactors Load culture TC-3 Accessories Deformation and flow Flow-tension gripsFlow-tension grips
Designed to allow the application of flow through the lumen of tubular vessels simultaneous to the application of tension loads. Given their geometry, those samples cannot bear compression loads, so once the samples are campled in the grips, only tension loads will be suitable to be applied on them.
Just by replacing an adaptor, the grips can be used with different scaffold diameters, which renders in a highly versatile and configurable system
The TC-3 system can be operated both in vertical and horizontal configurations with this set of grip.
Technical Specifications
| Flow-tension grips | |
|---|---|
| Grips for sheet-shaped samples compatible with the TC-3 loading bioreactor system | |
| Material | Stainless steel |
| Sample diamter | From 1.65 to 5 mm in diameter |
| Maximal displacement | 23 mm (for the 1/16" connector) |
| Minimal displacement | 0 mm |
| Working configuration | Vertical/Horizontal |
Compatible accessories
-
Tension-compression & flow chamber +
This TC-3 culture chamber -which allows applying the combined application of mechanical and flow loads- has been designed to be… Read More -
Flow-compression grips +
These grips have been designed to apply compression loads and perfusion flow through the pores a thick scaffolds simultaneously. To… Read More -
Flow-tension grips +
Designed to allow the application of flow through the lumen of tubular vessels simultaneous to the application of tension loads.… Read More
- 1